PARKER RACOR SNAPP MARINE FUEL FILTER / WATER SEPARATOR ASSEMBLY 23281-30 MICRON

£71.98 £59.98
SKU
23281-30

PARKER RACOR SNAPP MARINE FUEL FILTER / WATER SEPARATOR ELEMENT WITHOUT DRAIN R23107

 

THE FASTEST, CLEANEST FUEL FILTER CHANGE ON EARTH. NO TOOLS, NO MESS, NO FUSS.

At the heart of the SNAPP™ fuel filter is Racor’s proprietary Aquabloc® technology. Aquabloc® is a unique engineered media that incorporates pleat-spacing corrugations and a graduated pore structure to increase dirt-holding capacity and extend filter life. The media is waterproof and rustproof, capturing contaminants while the specially treated surface separates and coalesces water from the fuel; causing the water to gather into large droplets that then fall into the clear collection bowl.

Aquabloc® elements are available in three different ratings, including:

30 micron (98%@30 micron) – Ideally suited as a pre-filter to protect downstream filters from excessive contamination. Extends the life of on-engine filters. Flow up 26 gph (129 lph) in both gasoline and diesel using the SNAPP™ filter.

10 micron (98%@10 micron) - Captures more contaminants than 30 micron elements, and is more effective at stopping water. Extends the life of the entire fuel system. Flow up 34 gph (129 lph) in gasoline and 26 gph (98 lpm) diesel using the SNAPP™ filter.


“2” micron (98%@4 microns) – Provides maximum water removal and filtration and is capable of protecting all modern injection systems, while greatly extending the life of difficult-to-service on-engine filters. Flow up 40 gph (151 lph) in gasoline and 26 gph (98 lpm) in diesel using the SNAPP™ filter.


How it Works


The SNAPP™ filter can be installed in the fuel line between the tank and the engine. The filter “snaps” into its mounting bracket. The quick-connect fittings allow for fast connection to fuel lines. The inlet and outlet ports can be positioned as necessary by flipping the SNAPP™ filter in the bracket. Changing the filter can be done by squeezing the quick release fitting tabs, removing and priming the new filter (flow outlet of old to inlet of new), re-attaching fuel lines, and snapping the new filter into the bracket.

Max. Flow rate 26 GPH (100 LPH)
Horsepower Range up to 140HP
Aquabloc Micron Rating 2, 10 or 30 micron
Height 7.8" (198mm)
Width 3.8" (97mm)
Depth 4.1" (104mm)
Water Sump Capacity 100ml
Body Material Nylon 6 Plastic
Bracket Material Stainless Steel
Port Size 3/8" (9.5mm)
Rated Pressure 50PSI
Water Removal efficiency 99%
Rated Temp. range -20º to 150ºF (-29º to 66ºC)
More Information
Weight (KG) 0.800000
Country of Manufacture United States
Manufacturer Parker Racor